亚洲人成无码www久久久,偷拍区图片区小说区另类全色,99精品视频永久在线看免费,国产精品无码无卡无需播放器,一级毛片成人免费观看视频网站
Hello, welcome to Jinan Huawei CNC machinery CO., Ltd

National Advisory Service Hotline

Advanced Search:


Contact us


contact us

Contacts:JI Manager

Unified hotline:400-6587-688

Tel: (86)531-88276988

Fax:(86)531-88276988

Phone number:0086-15269186223

Address: No.18 Tonghua Road ,

Licheng district , Jinan city, 
shandong province, China



technical support

Operation process of edge inspection vibration knife integrated machine

Source: Time:2024-08-16 09:11:35 views:

The operation process of the edge inspection vibration knife integrated machine is as follows: 1. Connect the power and turn on the machine. 2. Adjust parameters according to the cutting material settings (you can follow the prompts)

The operation process of the edge inspection vibration knife integrated machine is as follows:

1. Connect the power and turn on the machine.

2. Adjust the parameters according to the cutting material settings (you can follow the prompts).

3. Place the materials to be processed on the worktable of the vibration machine and fix them securely; Or place the pre cut semi-finished products on the conveyor belt and fasten both ends with fixtures.

4. Select the corresponding control program memory number (such as D0). Input the size information of the material, drive the "X-axis" and direction related actions to complete the automatic feeding function and the setting of the rear baffle door closing function, and select the feed speed to complete the coarse adjustment and micro withering of the slicing depth, so as to smoothly remove the chips without affecting their normal operation and improve work efficiency; Press the start button to start production of the product. By adjusting the equipment to achieve production and improve overall work efficiency.

5. If there are any abnormal phenomena during operation, immediately shut down for inspection, maintenance, mold replacement, and parts replacement to ensure safety before restarting for use, extending the service life and increasing production capacity. At the same time, it is necessary to regularly lubricate and lubricate the machine base. The lubrication parts mainly include: bearing positions, chain guide rails, pin transmission belts, upper and lower brackets, front and rear chassis, ball screw pairs, lifting devices, and other active link parts. Timely and effective maintenance and repair operations should be carried out to keep the machine clean and free of debris, floating dust, and dirt accumulation, and to prevent phenomena such as inflexibility, jamming, etc. from affecting normal operation.

In daily work, it is also important to observe the noise level of the equipment to avoid unnecessary damage caused by vibration, in order to ensure good accuracy and service life. The above is an introduction and explanation of the steps for the inspection of the vibration knife integrated machine and related operations. Hope it can help you! Adjust and optimize the operation process according to specific needs to reduce error rates and work pressure~

keys: 
亚洲人成无码www久久久,偷拍区图片区小说区另类全色,99精品视频永久在线看免费,国产精品无码无卡无需播放器,一级毛片成人免费观看视频网站