亚洲人成无码www久久久,偷拍区图片区小说区另类全色,99精品视频永久在线看免费,国产精品无码无卡无需播放器,一级毛片成人免费观看视频网站
Hello, welcome to Jinan Huawei CNC machinery CO., Ltd

National Advisory Service Hotline

Advanced Search:


Contact us


contact us

Contacts:JI Manager

Unified hotline:400-6587-688

Tel: (86)531-88276988

Fax:(86)531-88276988

Phone number:0086-15269186223

Address: No.18 Tonghua Road ,

Licheng district , Jinan city, 
shandong province, China



technical support

What precautions should be taken for side hole machines

Source: Time:2024-05-14 09:13:18 views:

During the use of the side hole machine, the following points should be noted: 1. Before operation, check whether the equipment is normal and confirm that there are no errors before starting the operation. Do not touch while the machine is working

During the use of the side hole machine, the following points should be noted:

1. Before operation, check if the equipment is functioning properly and start working after confirming that there are no errors. Do not touch rotating parts during machine operation; Non operators are not allowed to approach areas such as sheet metal and pliers that are prone to splashing metal. Wear work clothes and glasses to prevent iron filings from harming the body. It is strictly prohibited for unrelated personnel to interfere with the normal operation of the robot by changing settings or cleaning dust. Regular maintenance and calibration of the positioning system are also necessary to ensure its accuracy and safety. 2. After use, the site should be cleaned and the power switch should be turned off in a timely manner. Due to the large size of the welding, the protective cover needs to be cleaned after each processing to maintain the airtightness of the gas path system; Add a certain amount of engine oil to the controller at the end of each day to lubricate the worm gear mechanism. Before starting up, check whether the screws of each component are loose or detached; When inserting or removing the drill arm, be careful to hold down the button with your hand before releasing it to avoid safety accidents. 4. Strictly follow the safety technical regulations of the machine tool, and do not overload the equipment or violate its structural characteristics. 5. Keep timely maintenance records to provide reference materials for future work. 6. Pay attention to observing the operating status of the equipment. If there are any problems, stop the machine immediately for processing!

7. Establish a good working environment and stack workpieces in an orderly manner to prevent them from hitting mechanical equipment. 8. Pay attention to the protective film on the robotic arm to avoid contaminating other areas. 9. Do not disassemble parts or replace accessories at will!

The above are the precautions about the side air compressor. I hope it can help you~

keys: 
亚洲人成无码www久久久,偷拍区图片区小说区另类全色,99精品视频永久在线看免费,国产精品无码无卡无需播放器,一级毛片成人免费观看视频网站